Acura Service Bulletin 00-001
Applies To:
1994–98 Integra 3‑Door – ALL
1999 Integra 3‑Door – from VIN JH4DC2 ... YS000001 thru JH4DC2 ... YS002822
1999 Integra 3‑Door – from VIN JH4DC4 ... YS000001 thru JH4DC4 ... YS006740
Date: February 14, 2000
Guide Channel Cover Comes Loose
Symptom
The guide channel cover comes loose from the window guide channel.
Probable Cause
Heat or previous removal has weakened the adhesive.
Corrective Action
Replace the cover.
Parts Information
Guide Channel Cover: P/N 72233‑SS0‑013
Required Materials
3M General Purpose Adhesive Cleaner: 3M P/N 051135‑08984
(Each container will clean about 100 vehicles.)
Warranty Claim Information
| OP# | Description | FRT | Template ID |
|---|---|---|---|
| 826138 | Replace guide channel cover (left side) | 0.2 | 00-001A |
| 827138 | Replace guide channel cover (right side) | 0.2 | 00-001B |
| 826138 / 827138 | Replace guide channel cover (both sides) | 0.4 | 00-001C |
| Failed Part: | P/N 72233‑SS0‑003 |
| Defect Code: | 061 |
| Contention Code: | A02 |
| Skill Level: | Repair Technician |
Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You must request consideration and get a decision before starting work.
Repair Procedure
1. Remove and discard the affected guide channel cover.
2. Use adhesive cleaner to remove any adhesive residue from the window guide channel.
3. Peel the protective paper from the new cover, and press it firmly against the channel.
4. If necessary, replace the cover on the other side.
Customer Information: The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do‑it‑yourselfers,” and you should not assume this bulletin applies to your vehicle. To determine whether this information applies, contact an authorized Acura automobile dealer.