AboutAcura: Problems

Showing posts with label Problems. Show all posts

Tuesday, December 3, 2013

1st Gen Acura TSX Technical Service Bulletins

I started to capture TSBs on this site, but it takes forever and there are other sites out there that do a better job. I don't want to reinvent the wheel, for example, AcuraZine has a comprehensive TSB list for the first generation Acura TSX.

Includes the following issues:

TSB 00-037 : Brake Disk Refinishing Guidelines Applies to all models

TSB 03-009 : 2004 Acura Paint Codes Applies to all 2004 models

TSB 03-010 : OBD II DTCs and Their Associated Monitors Applies to all OBD II equipped models

TSB 03-011 : 2004 TSX TQI and New Model Information Applies to all 2004 TSX models

TSB 03-012 : Immobilizer System (Type 4) Applies to all 2004 TSX models

TSB 03-013 : TL and TSX TQI of the DVD Navigational System with Voice Recognition Applies to all 2004 & 2005 TSX models with Navi

TSB 03-024 : 2004 Acura Paint Codes Applies to all 2004 models

TSB 04-004 : Updating the Honda Interface Module (HIM) Model 3557-0100-00 Applies to all models

TSB 04-012 : Product Update - Out of Specification Automatic Transmission Case Applies to 2004 TSX with VIN in the following range: JH4CL96..4C025689 to JH4CL96..4C028611

TSB 04-021 : Warranty Extension - Audio-HVAC Display is Dim or Dark Applies to all 2004 TSX models

TSB 04-024 : Buzzing from the Front Door Panels or Speakers Applies to 2004 TSX with VIN in the following range: JH4CL9...4C000001 to JH4CL9...4C016871

TSB 04-026 : Safety Recall - TSX Rear Wire Harness Applies to 2004 TSX with VIN in the following range: JH4CL9...4C000070 to JH4CL9...4C040281

TSB 04-041 : Moisture in the Headlight Applies to all 2004 TSX models

TSB 04-042 : Rattle from the A-Pillar Applies to all 2004 TSX models

TSB 05-014 : Child Seat Anchor Location Button is Missing Applies to all 2004-05 TSX models

TSB 05-015 : Rear Stabilizer Link is Broken Applies to all 2004-05 TSX models

TSB 05-018 : Navigation System DVD Information and Inspection Applies to all 2004-07 TSX models

TSB 05-032 : 2006 Acura Paint Codes, Exterior and Interior Color Code Locations Applies to all 2006 TSX models

TSB 05-041 : 2006 TSX - TQI of the DVD Navigation System with Voice Recognition Applies to all 2006 TSX models with Navi

TSB 05-046 : 2006 TSX - TQI and New Model Information Applies to all 2006 TSX models

TSB 06-001 : Audio, Navigation, and RES Unit In-Warranty Exchange, and Audio and DVD Player Out-of-Warranty Repair Applies to all models

TSB 06-002 : Front Subframe Removal Adapter Applies to all 2004-06 TSX models

TSB 06-007 : Right Rear Wheel Camber Out Of Specification Applies to the following TSX models: 2004 - all 2005 - VIN range from JH4CL9...5C000001 to JH4CL9...5C015076

TSB 06-016 : Trunk Lid Does Not Open Applies to all 2004-05 TSX models

TSB 06-018 : Driver's Seat Squeaks Applies to all 2006 TSX models

TSB 06-023 : MIL Comes On With DTC P0116 Applies to all 2006 TSX models

TSB 06-029 : XM Satellite Radio and Audio Accessories Play at the Same Time Applies to 2006 TSX models with VIN range from JH4C69...6C000007 to JH4C69...6C025147

TSB 06-034 : Vehicle Pulling or Drifting Applies to all models

TSB 06-042 : 2007 TSX - TQI and New Model Information Applies to all 2007 TSX models

TSB 06-046 : Tubeless Tire Repair Information Applies to all models

TSB 06-050 : Warranty Extension - Vehicle Warranty Mileage Applies to all models purchased between April 13, 2002 and November 7, 2006.

TSB 06-053 : 2007 Acura Paint Codes, Exterior and Interior Color Code Locations Applies to all 2007 TSX models

TSB 07-007 : Clarification of Acura Unibody Repair Policy Applies to all models

TSB 07-010 : Music Link (For iPod) General Information and Symptom Troubleshooting Applies to all models with accessory Music Link installed

TSB 07-016 : Product Update - Moisture in Headlight Applies to all 2004-05 TSX models

TSB 07-017 : Safety Recall - Fuel Pump Relay May Cause Engine No-Start or Stalling Applies to 2005 TSX models with VIN range from JH4CL9...5C018626 to JH4CL9...5C025175

TSB 07-021 : Front Brakes Judder Applies to all 2004-07 TSX models

TSB 07-025 : AC Leak Detection Applies to all models

TSB 07-027 : Updating the AcuraLink Control Unit Applies to all vehicles with AcuraLink

TSB 07-030 : 2008 TSX - TQI and New Model Information Applies to all 2008 TSX models

TSB 07-040 : 2008 Acura Paint Codes Applies to all 2008 models

TSB 07-041 : Brake Pedal is Low and Feels Soft Applies to all 2004-07 TSX models

TSB 07-050 : Service Manual Update:HFL (HandsFreeLink) General Troubleshooting Information Applies to all 2006-08 models with HandsFreeLink

TSB 07-057 : Low Tire Pressure Indicator Stays On, But All Tire Pressures Are OK Applies to the following TSX models: 2007 - all 2008 - VIN range from JH4CL9...8C000001 to JH4CL9...8C005018

TSB 07-059 : ATF Leak Detection Applies to all TSXs with automatic transmissions

TSB 08-011 : Front Door Glass Squeaks When Going Up or Down Applies to all 2004-08 TSX models

TSB 08-012 : MIL is On With DTC P1172 or P2A00 Applies to all 2004-06 TSX models

TSB 08-017 : 2009 TSX - TQI of the DVD Navigation System With Voice Recognition Applies to all 2009 TSX models

TSB 08-020 : 2009 TSX - TQI and New Model Information Applies to all 2009 TSX models

TSB 08-025 : Fuel Fill Door Is Hard To Open Applies to all 2009 TSX models

TSB 08-026 : Load Carrying Capacity Reduced Label Applies to all TSX models

TSB 08-027 : Beverage Holder Lid Will Not Open Applies to all 2009 TSX models

TSB 10-025: Power Steering Rack Squeaks Applies to all 2004-2008 TSX Models

Friday, November 9, 2012

[TSB B05-008] No Sound From the Audio System

Technical Service Bulletin B 05-008

No Sound From the Audio System

Applies To: 2005 Acura RL – From VIN JH4KB16..5C000001 thru JH4KB16..5C005948

PROBLEM

There is no sound from the audio system in any mode.

CORRECTIVE ACTION
Replace the stereo amplifier.

PARTS INFORMATION
Stereo Amplifier: P/N 39186-SJA-A01

WARRANTY CLAIM INFORMATION

In warranty: The normal warranty applies.

Operation Number: 0101B3

Flat Rate Time: 0.5 hour
Failed Part: P/N 39186-SJA-A01
Defect Code: 03217
Symptom Code: 03257
Skill Level: Repair Technician

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

Remove the No. 2 (30A) fuse from the passenger’s under-dash fuse/relay box, and wait 1 minute. Reinstall the fuse, and recheck the audio system for normal operation.
• If there is still no sound from the audio system, this service bulletin does not apply; continue with normal troubleshooting.
• If there is sound from the audio system, go to REPAIR PROCEDURE.

REPAIR PROCEDURE
Replace the stereo amplifier:
• Refer to page 23-70 in the 2005 RL Service Manual.

[TSB B12-038] Vibration in Gear or Knock Noise on Acceleration

Technical Service Bulletin B 12-038:

Vibration in Gear or Knock Noise on Acceleration

Applies To: 2005–11 RL – ALL
(2005 Acura RL, 2006 Acura RL, 2007 Acura RL, 2008 Acura RL, 2009 Acura RL, 2010 Acura RL, 2011 Acura RL)

SYMPTOM

There is a vibration when putting the transmission in gear or a knocking noise when accelerating.

PROBABLE CAUSE

The rubber on the engine mounts has deteriorated from high underhood engine temperatures.

CORRECTIVE ACTION

Replace the front, the side, or both the engine mounts.

PARTS INFORMATION

Front Engine Mount: P/N 50830-SJA-305

Front Mount Flange Nut, (2 required): P/N 94050-12080

Front Engine Flange Bolt, (10 x 20 mm), (4 required): P/N 90163-S5A-000

Front Engine Flange Bolt, (10 x 35 mm): P/N 90163-SDA-A01

Side Engine Mount: P/N 50820-SJA-305

Side Mount Flange Bolt, (12 x 45 mm): P/N 90161-SDA-A01

2005–07 Side Mount Flange Bolt (10 x 60 mm), (2 required): P/N 90127-S73-000

2008–11 Side Mount Flange Bolt (10 x 60 mm), (2 required): P/N 90168-TA1-A00

WARRANTY CLAIM INFORMATION

The normal warranty applies.

OP#	Description	FRT
112102	Replace the front engine mount in REPAIR PROCEDURE A.	1.2
112101	Replace the side engine mount in REPAIR PROCEDURE B.	0.3
1121F4	Replace the front and side engine mounts in both repair procedures.	1.5

Failed Part: P/N 50830-SJA-E01
Defect Code: 01102
Symptom Code: 03220
Skill Level: Repair Technician

DIAGNOSIS
1. Stand to the side of the vehicle’s engine compartment, and watch the top of the front engine mount.
2. Have an assistant shift the transmission into D. With the assistant’s foot firmly on the brake pedal, have him quickly press the accelerator pedal and release it.
3. Look for contact or listen for a knock between the top of the front engine mount and the bottom of the front engine mount stop.

4. Visually inspect the side engine mount for tearing or signs of leakage.

• If the front engine mount makes contact or knocks, go to REPAIR PROCEDURE A.

• If the side engine mount is torn or leaking, go to REPAIR PROCEDURE B.

• If both front and side engine mounts are damaged, do both REPAIR PROCEDURE A and B.

REPAIR PROCEDURE A

1. Disconnect the washer tubes. Remove the clips, then remove the right upper fender trim.

2. Raise the vehicle on a lift.

3. Remove the splash shield.

• Remove the clips that secure the front inner fender and the splash shield to the body.

• From under the front bumper, remove the bolts and the clips.

• From under the body, remove the bolts and the clips.

• Release the hooks of the

4. Remove the harness connectors, the ground cable, and the harness clamps.

5. Loosen the A/C condenser fan shroud mounting bolts.

6. Lower the vehicle.

7. Remove the air intake duct cover and the coolant reservoir.

8. Disconnect the RFC connectors and the A/C condenser fan motor connector, then remove the harness clamps.

9. Remove the RFC unit from the radiator fan shroud.

10. Remove the A/C condenser fan shroud assembly, then remove the radiator fan shroud assembly. NOTE: Pull up the radiator, then move the radiator fan shroud assembly toward the right side of the vehicle to allow enough space to lift it up and away from the A/C condenser fan shroud assembly.

11. Remove the front engine mount stop, and disconnect the vacuum hose.

12. Remove the front engine mount flange bolt.

13. Lift and support the engine with a jack and a block of wood under the engine/transmission.

14. Remove the front engine mount from the subframe.

15. Remove the front engine mount insulator, then disconnect the vacuum hose.

16. Remove the front engine mount insulator, then disconnect the vacuum hose.

17. Reconnect the vacuum hose, and install the engine mount insulator to the front engine mount.

18. Install the new front engine mount to the front subframe, then torque the new bolts to 54 N.m (40lb-ft).

19. Remove the jack and the wood block.

20. Tighten the new front engine mount flange bolt to 54 N.m (40 lb-ft), then install the front engine mount stop and tighten the new nuts to 64 N.m (47 lb-ft).

21. Reconnect the vacuum hose.

22. Reinstall the radiator fan shroud assembly and tighten the bolts to 7.0 N.m (5.2 lb-ft).

23. Reinstall the A/C condenser fan shroud assembly.

24. Reinstall the RFC unit.

25. Reconnect the RFC connectors and the A/C condenser fan motor connector, then install the clamps.

26. Reinstall the coolant reservoir, and the air intake duct cover.

27. Raise the vehicle on a lift.

28. Tighten the A/C condenser fan shroud mounting bolts to 7.0 N.m (5.2 lb-ft).

29. Reinstall the harness connectors, the ground cable, and the harness clamps.

30. Reinstall the splash shield.

31. Lower the vehicle.

32. Reinstall the right side fender trim.

REPAIR PROCEDURE B

1. Lift and support the engine with a jack and a block of wood under the engine oil pan.

2. Remove the ground cable, then remove the upper half of the side engine mount bracket.

3. Remove the side engine mount.

4. Reinstall the new side engine mount and tighten the bolts to 54 N.m (40 lb-ft).

5. Install the upper half of the side engine mount bracket, and tighten the two new vertical mounting bolts to 54 N.m (40 lb-ft).

Thursday, January 28, 2010

[TSB 09-041] TSX Engine Pings During Moderate to Heavy Acceleration

TSB 09-041

Apples To:2009 TSX – ALL
2010 TSX L4 – From VIN JH4CU2...AC000001 thru JH4CU2...AC009053

SYMPTOM:The engine pings during moderate to heavy acceleration.

PROBABLE CAUSE:The PCM software, combined with knock sensor sensitivity, may not adjust the ignition timing as expected.

NOTE: This condition does not cause internal engine damage. Some engine ping is a desired characteristic for optimal performance and fuel economy.

CORRECTIVE ACTION:Replace the knock sensor, then update the PGM-FI software with the HDS. If you’re working on a vehicle with A/T, also update the A/T software.

NOTE: On vehicles with A/T, you must update the A/T software to complete the repair.
Click here for more details.

Wednesday, January 6, 2010

[TSB 08-057] HandsFreeLink (HFL) Doesn't Work

SYMPTOM
The HandsFreeLink (HFL) system doesn’t work, and the battery sometimes won’t start the vehicle.

APPLIES TO
2007-08 TL (ALL)
2008 MDX (ALL)

PROBABLE CAUSE
The HFL control unit has an internal problem, which creates a parasitic current draw of 250 mA.

CORRECTIVE ACTION
Replace the HFL control unit.

PARTS INFORMATION
HFL Control Unit:
MDX:
P/N 39770-STX-A01

TL except Type-S:
Moon Lake Gray, NH528L
P/N 39770-SEP-A12ZA
Gray, YR167L
P/N 39770-SEP-A12ZB
Light Cream Ivory, YR240L
P/N 39770-SEP-A12ZC

TL Type-S:
Graphite Black, NH167L
P/N 39770-SEP-A62ZA
Gray, NH556L
P/N 39770-SEP-A62ZB

WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed Part: P/N 39770-SEP-A12ZA
Defect Code: 03217
Symptom Code: 09001
Skill Level: Repair Technician

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.

For the full details, get the PDF here.

Monday, November 9, 2009

Fix-It Tips for a Faded or Blotchy Dashboard

Currently Applies To: ’04–08 TL

Got a vehicle with a faded or blotchy dashboard? The likely cause is the compatibilizer material in the dashboard migrating through the cover. After the material ages, proper cleaning and an application of a non-silicone-based protectant should bring it back to showroom condition. Keep in mind, though, if you clean the dashboard before all that material has migrated, you may need to do it again and reapply the non-silicone-based protectant.

To clean the dashboard, first moisten a clean shop towel with Acura Leather & Vinyl Cleaner (P/N 08700-9214A), then vigorously rub the surface until the discoloration goes away. For best results, clean the dashboard twice, wiping in different directions.

To protect the dashboard, moisten another clean shop towel with a non-silicone-based protectant and generously apply it to the surface. Do this twice, wiping in different directions to make sure you’ve covered all areas. After some extensive testing of current protectants
available in the market, Acura recommends 303 Aerospace Protectant from 303 Products, Inc. When it comes to Acura dashboards, Acura has found this product offers even better protection than what was offered before with Acura Leather & Vinyl Protectant (P/N 08700-9209A).

I actually do own and use a bottle of 303 Aerospace Protectant, it was recommended on Acurazine.com. Aerospace Protectant also leaves the dash shiny! ;)

[Source] Sept. 2009 Acura ServiceNews

Saturday, November 7, 2009

Properly Set ATF Dipstick to Avoid Starter Motor Failure

Currently Applies To: ’03 and later MDX and ’04 and later TL

Did you know that if you don’t properly set the ATF dipstick, you can wind up with a starter motor failure? Sounds a bit far-fetched, but it’s true! The reason is the ATF dipstick’s location; it’s next to the starter motor.

If you don’t properly set the dipstick in its tube, ATF can spill out and soak the starter motor. That fluid will eventually work its way into the motor components, causing this sort of damage:

So, whenever you need to remove the ATF dipstick, always make sure you properly reset it by pushing it all the way back into the tube. If you don’t, you could wind up with a failed starter motor.

[Source] September 2009 Acura ServiceNews

Wednesday, May 7, 2008

[TSB] 3rd Gear Problems for some Hondas & Acuras

SYMPTOM
The 6-speed manual transmission grinds when shifting into 3rd gear, pops out of 3rd gear, or is hard to shift into 3rd gear.

NOTE: These symptoms can be intermittent and sometimes more noticeable in colder climates.

PROBABLE CAUSE
The transmission has a faulty 3rd gear synchronizer or 3-4 shift sleeve.

CORRECTIVE ACTION
Replace the 3rd gear set.

VEHICLES AFFECTED
2003–07 Accord V6 with M/T: ALL

2008 Accord V6 with M/T 2-Door:
From VIN 1HGCS218.8A000001
thru 1HGCS218.8A003478

2006–07 Civic Si 2-Door: ALL

2008 Civic Si 2-Door:
From VIN 2HGFG215.8H700001
thru 2HGFG215.8H701973

2007 Civic Si 4-Door: ALL

2008 Civic Si 4-Door:
From VIN 2HGFA555.8H700001
thru 2HGFA555.8H702465

2003 Acura 3.2CL with M/T

2002-06 Acura RSX with six-speed

2004-08 Acura TL with M/T

[Source] AutoBlog.com

Link to Honda PDF / Link to Acura PDF

Friday, February 29, 2008

Acura recalls 273,000 TLs

Honda Motor Co. issued two separate recalls for its Acura TL sedan to address potential fires under the hood and fix problems with the windshield wiper motor.

Honda is recalling 273,000 2004-2008 TLs because prolonged high temperatures underneath the engine hood could cause the power steering hose to deteriorate, causing the hose to crack and leak power steering fluid. The fluid could leak onto a hot catalytic converter and lead to smoke and a possible fire. Acura spokesman said there had been no fires or injuries reported. Dealers will install a new heat-resistant power steering hose free of charge.

In the second action, Honda is recalling 129,600 TLs from the 2004-05 model year to address a potential failure of the circuit breaker inside the windshield wiper motor. If the circuit breaker fails, it could prevent the wiper from working and increase the likelihood of a crash. There also have been no reports of crashes or injuries tied to the windshield wiper issue. Dealers will inspect the windshield wiper motor and replace the motor if they find signs of corrosion.

[Source] Detroit News

Thursday, December 6, 2007

[TSB] Acura TL Moans When Engine Is Cold

Acura TL Power Steering Moans or Whines

TSB: 07-060

Applies To: 2004-07 Acura TL (ALL)

SYMPTOM
A moan or whine is heard when turning the steering wheel when the engine is cold. There may be air bubbles or foam in the power steering reservoir. The noise usually goes away when the engine warms up.

PROBABLE CAUSE
Air enters the power steering pump through the inlet joint O-ring.

CORRECTIVE ACTION
Replace the O-ring on the power steering pump inlet joint.

PARTS INFORMATION
O-ring: P/N 91345-RDA-A01

REQUIRED MATERIALS
Acura Power Steering Fluid: P/N 08206-9002 (One container repairs about 12 vehicles.)

WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Operation Number: 5121B5
Flat Rate Time: 0.3 hour
Failed Part: P/N 91345-PAA-A01
Defect Code: 07408
Symptom Code: 04201
Template ID: 07-060A
Skill Level: Repair Technician

Out of warranty: Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE
1. Remove the right side engine compartment cover (7 clips and 1 bolt).

2. Remove the bolt holding the inlet joint to the power steering pump housing.

3. Place a shop towel under the pump inlet.

4. Twist the inlet joint back and forth until it is loose, then carefully disconnect the joint and point the hose upward to minimize fluid loss.

5. Remove the inlet joint O-ring.

6. Apply power steering fluid to a new O-ring, and install it on the inlet joint.

7. Install the inlet joint, and torque its bolt to 11 N.m (8 lb-ft).

8. Top off the power steering fluid, if needed. Start the engine, and let it idle. Confirm that the noise is gone and that the system is operating properly.

9. Install the right side engine compartment cover.

If this site helped you save some money, please donate via PayPal. Any amount accepted! Thank you. :)

AboutAcura

Pages